 Product Details |
 |
 Information |
 |
| Search f2s |
|
|
|
Using VOIP.
How to setup VOIP on your Billion VOIP router Firmware version 5.04+.
Please click here if your billion router has a software/firmware version of 5.03 or below.
|
Step 1. Please make sure you have setup the ADSL side of the router before setting up the VOIP. If you need help doing this please click here..
Step 2. You will need to have setup a freedom2phone VOIP account before you can continue. You can do this by logging into your members area, If you need to do this
click here and go to Activate your freedom2phone VoIP account.
Step 3. Login to the Router:
Open Internet Explorer or your default web browser and type http://192.168.1.254 on the address bar then hit enter or click go.
You will be presented with a user name and password prompt. Enter user name as admin, password as admin and click OK. This will take you to the modem's Status Page.
Step 4. From the left hand side menu Click on Configuration, VOIP, and Wizard.
Under the VoIP wizard Setting for Phone Port 1
in the Phone Number Field enter your 0845 phone number without any spaces
In the Authentication Password field please enter the 0845 account password that you set in the members area.
Click Apply
Step 5. You will Now see SIP Device Parameters 
Next to SIP Click on Enable
Then Click Apply
Step 6. Save the Settings:
Click Save Config
Click Apply
Click OK on the popup
Step 7. Reboot the Router.
When the settings have been saved click The Blue Restart Button
Select With Current Settings and Click restart.
You will then see a count down timer, soon as the timer is up the router will have been restarted and should reload the Status Page.
Final Step! Check that you are connected to the VOIP service.
From the left hand side menu Click on Configuration, VOIP, and Phone Port. If your settings are correct will see registered as below.
If you see failed under Registered please check your settings and restart from step 4
|
|
